Installation manual

PS10270JENAA01 20/10/2004 99
To power up the M6501R IP PBX:
1 Press the black button to the left of the power supply module.
Yellow and green LEDs light up on the front panel of the power supply module.
To power up the M6501L IP PBX:
1 Power up the expansion cabinet (if one is fitted).
Press the black button to the left of the power supply module.
Yellow and green LEDs light up on the front panel of the power supply module.
2 Power on the main cabinet.
Press the black button to the left of the power supply module.
Yellow and green LEDs light up on the front panel of the power supply module.
The system begins its test sequence, displaying the results on the programming console. Wait
for the main menu to appear on the screen before performing a total reset.
48 V external
battery connector
Mains connector
On/off switch
Fuse holder
(2 T 3, 15 H fuses)