MODEL:WMSMCZ3H / WMSMCZ3H-SB A PAIR C B A PAIR C B - INSTALLATION AND OPERATION MANUAL PLEASE READ INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE
TABLE OF CONTENTS INTRODUCTION...............................................................................................3 FEATURES........................................................................................................3 PARTS INCLUDED WITH MAIN UNIT..............................................................3 IMPORTANT SAFETY INSTRUCTIONS.......................................................... 4 PLACING AND MOUNTING....................................................................
INTRODUCTION Thank you for choosing a Connexx product. We hope you will find the instructions in this owner's manual clear and easy to follow. If you take a few minutes to review, you will learn how to use all the features of your new media center for maximum enjoyment. FEATURES Features of the WMSMCZ3H media center include: Digital FM tuner w/10 presets Bluetooth wireless technology 3 zone audio distribution HDMI (ARC) on rear panel HDMI IN on front panel 3.
The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER S E RV I C I N G TO Q U A L I F I E D S E RV I C E PERSONNEL.
13 ) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture does not operate normally, or has been dropped. 6 ) Clean only with dry cloth Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.
PLACING & MOUNTING 1. Placing When placing the media center in any type of enclosed space, be sure to allow space around it for ventilation. If placing in a tight space without ventilation, heat generated from the unit could produce a potential heat hazard. 2. Mounting Rough opening cut-out (WMSMCZ3H)........................................................10 5/8(Width) x 3 3/4(Height) x 5 5/8(Depth) in (WMSMCZ3H-SB)..................................................
GENERAL VIEW Front View 1 2 3 4 5 6 A PAIR 7 10 C 11 B 8 12 9 14 15 16 13 9. Zone B touch button 10. Next touch button 11. Play/pause, Station recall touch button 12. Volume down touch button 13. Power on/off button 14. USB port 15. AUX IN jack 16. HDMI IN port 1. Zone A touch button 2. Zone C touch button 3. Display 4. Remote sensor 5. Previous touch button 6. Volume up touch button 7. Source touch button 8.
Rear View 1 HDMI OUT (ARC) 2 OPTICAL IN EXT IR TV AUDIO IN 3 4 5 6 7 5. OPTICAL IN jack 6. EXTERNAL SUBWOOFER connector 7. Power/speaker wire harness socket 1. HDMI OUT (ARC) jack 2. ANTENNA jack 3. TV AUDIO IN jacks 4.
SPEAKER/ POWER WIRE SOCKET DIAGRAM GRAY- B RIGHT + SPEAKER (6X4-ohms) WIRING COLOR CODE GUIDE 12V DC Power Extension CAUTION! Connecting the speakers incorrectly will cause distortion and damage the power amplifier.
REMOTE CONTROL 1. Power on/off button 2. Zone A button 1 3. Zone B button 4. Source button 2 3 4 5 5. TUNE + button 6. Previous button A B C ARC X 10 11 12 TUNE+ 7. TUNE - button 6 / 8. PAIR button 7 TUNE- 13 14 9. EQ button 10. ARC (audio return channel) button 11. Zone C button 8 PAIR 9 EQ 15 12. Mute button 13. Next button 14. Play/pause, preset button 15.
BATTERY INSTALLATION--- REMOTE CONTROL Battery Installation 1.Slide and lift the battery door (Figure 1). 2.Install 2 (two) AAA size batteries into the battery compartment as indicated by the polarity markings (Figure 2). 3.Replace the battery door (Figure 3). - Battery + + - Battery Precaution Follow these precautions when using a battery in this device: 1. Use only the size and type of battery specified. 2.
GENERAL OPERATIONS 1. Press the button on the unit or remote control to power on the unit from standby mode. 2. Press the button on remote control or touch the desired mode as listed: BT TV button on unit repeatedly to switch to HDMI ARC AUX FM OPTICAL USB NOTE: USB mode will be selected when the USB device is inserted. 3. During Playback: ~ Press the VOL+/VOL- buttons on the remote control or touch the + or - button on the unit to adjust volume level as desired.
LISTEN TO FM RADIO BEFORE OPERATION Insert the Antenna into the ANTENNA Jack on rear panel as illustrated as below. SEARCHING STATION 1. Power ON the unit. 2. Press the button on remote control or touch the mode, the FM frequency will appear on the display. button on unit repeatedly to switch to FM 3.
BLUETOOTH PAIRING AND PLAYBACK 1. Power ON the unit. 2. Press the button on remote control or touch the button on unit repeatedly until "BT" appears on display and blinks, now it is in BT pairing mode. 3. Activate the external BT Device and enter BT searching mode. Start pairing as the screen instructions on the external BT Player. For details pairing procedures, please refer to the user's manual of your BT Device. 4.
ADDING OPTIONAL EXTERNAL SUBWOOFER - + NOTE: Before connecting, please disconnect power. 1. Connect one end of subwoofer connection cable ( not supplied ) to the "+" Jack on the rear of the unit as the figure above. 2. Connect the other end to the "-" Jack on the rear of the unit as the figure above. 3. Power ON the unit. 4. Play the music as usual and set the desired volume.
CONNECT USING OPTICAL External DVD player OPTICAL OUT Optical Cable(Not Supplied) NOTE: Before connecting, please disconnect power. 1. Connect one end of optical connection cable ( not supplied ) to the OPTICAL IN jack on the rear of the unit as pictured above. 2. Connect the other end to the OPTICAL OUT jack on DVD PLAYER. 3. Power ON the unit. 4. Press the button on remote control or touch the appears on display. 5. Set the desired volume.
CONNECT TO TV (ANALOG) R L TV White Red TV AUDIO IN TV White L R Audio Cable(Not Supplied) Audio Out Jacks of TV/DVD/VCR/DVR Red NOTE: Before connecting, please disconnect power. 1. Connect as the figure above. 2. Power ON the unit. 3. Press the button on remote control or touch the button on unit repeatedly until " TV " appears on display. TV audio is selected and will play through the unit. 4. Play the audio or video as usual and set the desired volume.
CONNECT USING HDMI IN HDMI OUT (ARC) To HDMI OUT (ARC) on rear of the unit To HDMI IN on front of the unit STEP ONE STEP TWO To HDMI IN(ARC) on TV To HDMI OUT on the DVD player TV not supplied OPTICAL OUT External DVD player(not supplied) NOTE: Before connecting, please disconnect power. 1. Connect as the figure above. 2. Power ON the unit, the external DVD player and the TV. 3. Press the button on remote control or touch the appears on display. button on unit repeatedly until " HDMI " 4.
CONNECT USING HDMI OUT HDMI OUT (ARC) TV HDMI Cable (not supplied) To HDMI IN on TV NOTE: Before connecting, please disconnect power. 1. Connect as the figure above. 2. Power ON the unit. 3. Press the button on remote control or touch the appears on display. button on unit repeatedly until " ARC " 4. Play the audio or video through TV as usual and set to the desired volume. NOTE: The TV must have the ARC capability, and connected to HDMI ARC jack on capable TV.
AUX IN : LISTEN TO EXTERNAL AUDIO DEVICES AUX IN cable not included MP3 smart phone To the Phones/Aux Out/Line Out Jack on the external audio device 1. Connect one end of audio connection cable to the AUX IN jack on the front of the unit as illustrated above. 2. Connect the other end to the Audio out/Line out/Phone jack on the external player ( such as iPod, iPhone, iPad, MP3 player, smart phone... etc. ) 3. Power ON the unit. 4. Press the button on remote control or touch the appears on display.
TROUBLESHOOTING GUIDE Check the following guide before requesting service 6<03720 No power No sound 3266,%/( &$86( 3266,%/( 628/7,21 power cable not connected or blown fuse ~Check fuse ~Check 12V connection Volume in minimum position Raise volume level by pressing the VOL (Volume) + button The connected device is not in playback mode Play the music/movie in the connected device as usual and make sure the volume level of it is in high level Input source incorrect Press the button repeatedly to se
SPECIFICATIONS Operation Voltage.............................................................................................................DC10V-14V Power Supply Requirement.................................................................DC 12 Volts, Negative Ground Overall Dimension (WMSMCZ3H-SB)............................................741.2(W)x122.0(H)x161.0(D)mm Overall Dimension (WMSMCZ3H)..................................................312.0(W)x122.0(H)x161.0(D)mm Max Power Consumption...........
www.riverparkinc.com C 2019 RIVERPARK Inc. V.
