User's Manual

1. Install SIM card and memory card

■ 1.1 First Call

1> Insert the SIM card (turn off the mobile phone first). For

detailed installation instructions, please refer

to "1.2 Installing the SIM card."

2> Charging the battery of mobile phone. Please refer to

"1.4 Battery and Charging."

3> Press and hold the power button a little longer to open

mobile phone.

4> If unlock pattern is requested to input on the screen,

then enter the pattern you set to unlock

5> If PIN code is requested to input on the screen, then

enter your PIN code (PIN code is usually supplied with the

SIM card) and press "OK".

6> If unlock code is requested to input on the screen, then

enter the unlock code and press "Enter".

7> Touch the phone icon on the screen to bring up the dial

pad, input the phone number and press the dial button.

Note: You must first insert a valid SIM card and charge

the battery before using mobile phone.

■ 1.2 Install SIM card

There are a lot of data stored in your SIM card like phone

number, PIN (Personal Identification Number), PIN2, PUK

(PIN Unblocking Key), PUK2 (PIN2 Unblocking Key) and

IMSI (International Mobile Subscriber Identity) number

and network information, contact data, and SMS data.

Note:

· At present, operators do not provide PIN2 and PUK2

code in China. Please note it may not use the function

involved above codes in mobile phone·