User's Manual

-6-
times in succession, the SIM card will be
locked automatically, and prompting to enter
PUK code to unlock it. Therefore, please do
remember the PIN code, if you modify it.
PUK code (PUK1) is made up by 8 digits,
unmodifiable. When the phone is locked by PIN
code, please enter correct PUK code to unlock
the phone. If you incorrectly input the PUK code
ten times in succession, then the SIM card
cannot be used any more. Some PUK codes are
provided together with the SIM card, some
should be gained from the network service
provider. If you don’t know the PUK code while
your PIN code is locked, please never input the
code casually. In this case, please call the hotline
of the service provider for your SIM card, after
simply checking about the user identity, you can
gain the PUK code for free to unlock your phone.
Caution：
Please be careful when use this function. If
you forget PUK code, please consult your
network operator. If you incorrectly input the
PUK code ten times in succession, the SIM
card will be scrap.
9.3.2 Modify PIN2
PIN2 code is the personal identification code
required for some certain functions (such as set
fixed number, set phone fare, etc).
PIN2 code is another password provided together
with SIM card by service provider. If wrongly input
it for three times in succession, the phone will be
locked until correct PUK2 code entered, for
detailed operation, please refer to PIN code and
PUK code.
Caution：
If you incorrectly input the PUK2 code ten
times in succession, you will not be able to
use SIM card. Please be careful when use
this function.
9.3.3 Phone locked
After activated this function, you should input
password each time you switch the phone on.
The defaulted password is “1234 or 0000”.
9.3.4 Modify the cellphone password
You can change the phone password.
The defaulted password is “1234 or 0000”.
9.3.5 Privacy
Secured by phone password, the phone will be
protected from other unauthorized users. When
password function has been activated for call
logs or message, you have to enter correct
password on corresponding main menu or