Instruction Manual
CQL1610-B Bluetooth Speaker
Instruction Manual (Read before proceeding)
Power:
Works on internal rechargeable Lithium battery. Please charge your speaker fully
before first use.
To charge the battery use the micro USB cable( included): insert the jack
into ”Charging” jack located on the back of the unit and then plug the USB connecter
of charging cable into the USB port on a computer for charging.
A red light will indicate the charging situation. When battery is full, the red light will
turn off automatically.
Disconnect the USB cable when it is fully charged
Playing Music Via Bluetooth
Turn your Bluetooth speaker on by sliding the power switch located on the back side
of the speaker to „ON‟ position.
The blue indicator light will flash quickly. This indicates that the speaker in pairing
mode and searching for your Bluetooth device.
Turn on the Bluetooth function on your device, search the speaker named
“VOB60073BT” and select it, your device will pair without a password. (If required,
enter the password “0000” to finalize the paring).The Blue light will begin to flash
slowly after pair is complete.
Start playing music on your device. Keep your device within 33feet (10 meters) of
your speaker.
Adjust the volume of your device to a comfortable level.
Turn off the unit when not in used.
Caution:
This is not a toy. Please keep away from small children.
Please keep away from water / heat.
Low power may cause poor connection even no working of Bluetooth.
Do not over-charge the battery.
Battery pack shall not be exposed to excessive heat such as sunshine, fire or the like.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed