User's Manual

Bluetooth Speaker
CQL1526-B
Instruction Manual (Read before proceeding)
Power:
 Works on internal rechargeable Lithium battery. Please charge your speaker fully
before first use. To charge the battery :
Using a Micro USB cable (included), insert the jack into the ”Charging” hole and then
plug the USB connecter into the USB port on a computer for charging.
 A red light will indicate the charging situation. When battery is full, the red light will
turn off automatically.
Bluetooth Speaker Operation
 Turn on the unit by pushing the switch to
on
position. A Blue light will start blinking to
indicate the speaker is in paring mode and searching for your Bluetooth mobile
device.
 Open the Bluetooth function on your device and search the speaker named “SB-02”.
After selecting this speaker, your device will pair without a password. (If required,
enter the password “0000” to finalize the paring).The Blue light will begin to flash
slowly after pair is complete.
 Start playing music on your device. Keep your device within 33feet (10 meters) of
your speaker.
 Adjust the volume of your device to a comfortable level.
 Turn off the unit when not in use.
Caution:
 This is not a toy. Please keep away from children.
 Please keep away from water / heat.
 Low power may cause poor connection even no working of Bluetooth.
 Do not over charge the battery.