User's Manual

CQL1550-B Bluetooth Speaker
Instruction Manual (Read before proceeding)
Power:
l Works on internal rechargeable Lithium battery. Please charge your speaker fully before first
use.
To charge the battery :
Using a Micro USB cable (included), insert the jack into ”Charging” jack located on the back
of the unit and then plug the USB connector into the USB port on a computer for charging.
l A red light will indicate the charging situation. When battery is full, the red light will turn off
automatically.
Bluetooth Speaker Operation
l Turn on the unit by pushing the switch on the back to the middle switch of the “ON”
position. A Blue light will start blinking to indicate the speaker is in paring mode and
searching for your Bluetooth mobile device.
l Open the Bluetooth function on your device and search the speaker named “SB-01”. After
selecting this speaker, your device will pair without a password. (If required, enter the
password “0000” to finalize the paring).The Blue light will begin to flash slowly after pair is
complete.
l Start playing music on your device. Keep your device within 33 feet (10 meters) of your
speaker. Under this mode, the Bluetooth speaker will stream music without Disco lights.
l Adjust the volume of your device to a comfortable level.
l Turn off the unit when not in used.
Disco Light Operation
l Turn on the color light by pushing the switch to third switch of the “ON” position.
l Disco colorful light will either work independently without playing music or dance to the
rhythm of the music.
l Turn off the color light by pushing the switch to “OFF” position
Caution:
l This is not a toy. Please keep away from children.
l Please keep away from water/heat.
l Low power may cause poor connection even no working of Bluetooth.
l Do not overcharge the battery.
l Battery pack shall not be exposed to excessive heat such as sunshine, fire or the like.