Datasheet

ManualsBrandsCONRAD COMPONENTS ManualsDiodesAssorted diodes VK-84520 120 pc(s)

DATASHEET



120pcs Assortment Rectifier Diode Set

92103c3

1) 110B2(W01g) - Bridge Rectifier: VR=100V, IF(DC)=1.5A @ 2pcs

2) 1N4007 - Silicon Rectifier: VR=1000V, IF(DC)=1A @ 50pcs

3) 1N4148 - Small signal diodes: VR=75V, IF(DC)=150mA @ 50pcs

4) 1N5408 - Silicon Rectifier: VR=1000V, IF(DC)=3A @ 14pcs

5) 6A10 - Standard Rectifier: VR=1000V, IF(DC)=6A @ 4pcs

Version 04/15



Distributed by Conrad Electronic SE

This data sheet is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau

(www.conrad.com). All rights including translation reserved. Reproduction by any method,

e.g. photocopy, microfilming, or the capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This data represent

the technical status at the time of printing. Changes in technology and equipment reserved.



Summary of content (10 pages)

PAGE 1
DATASHEET 120pcs Assortment Rectifier Diode Set Version 04/15 92103c3 1) 110B2(W01g) - Bridge Rectifier: VR=100V, IF(DC)=1.5A @ 2pcs 2) 1N4007 - Silicon Rectifier: VR=1000V, IF(DC)=1A @ 50pcs 3) 1N4148 - Small signal diodes: VR=75V, IF(DC)=150mA @ 50pcs 4) 1N5408 - Silicon Rectifier: VR=1000V, IF(DC)=3A @ 14pcs 5) 6A10 - Standard Rectifier: VR=1000V, IF(DC)=6A @ 4pcs Distributed by Conrad Electronic SE This data sheet is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.
PAGE 2
REVERSE VOLTAGE GLASS PASSIVATED BRIDGE RECTIFIERS - 50 to 1000Volts FORWARD CURRENT - 1.5 Amperes .366(9.3) .350(8.84) FEATURES ●Surge overload rating -40 amperes peak .220(5.6) .200(5.1) ●Ldeal for printed circuit board ●Reliable low cost construction utilizing molded plastic technique results in expensive product ●Mounting Position :Any 1.083 (27.5) MIN 0.921 (23.4) MIN .032(0.81) POS. .028(0.71) LEAD .220(5.6) .180(4.6) .220(5.6) .180(4.
PAGE 3
RATING AND CHARACTERTIC CURVES FIG.2-DERATING CURVE OUTPUT RECTIFIED CURRENT BRIDGE OUTPUT FULL WAVE RECTIFIED CURRENT AVERAGE AMPERES FIG.1-MXIMUM NON-REPETITIVE SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES 50 40 30 20 Pulse Wldth 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) 10 0 1 2 5 10 20 50 1.5 0 100 100 50 NUMBER OFCYCLES AT 60Hz 150 AMBIENT TEMPERATURE ,°C FIG.3-TYPICAL FORWARD CHARACTERISTICS FIG.
PAGE 4
GENERAL PURPOSE SILICON RECTIFIER 1N4001 THRU VOLTAGE RANGE CURRENT 1N4007 50 to 1000 Volts 1.0 Ampere FEATURES Low cost construction Low forward voltage drop Low reverse leakage High forward surge current capability. High temperature soldering guaranteed: 260 /10 seconds, 0.375" (9.5mm)lead length at 5 lbs (2.3kg) tension. MECHANICAL DATA Case: transfer molded plastic Epoxy: UL94V - 0 rate flame retardant. Polarity: Color band denotes cathode end.
PAGE 5
RATINGS AND CHARACTERISTIC CURVES IN4001 THRU IN4007 FIG.2-MAXIMUM NON-REPETITIVE PEAK FIG.1-TYPICAL FORWARD CURRENT FORWARD SURGE CURRENT 1.0 0.8 0.6 Single Phase Half Wave 60Hz 0.4 Resistive or Inductive Load 0.2 0.375"(9.5mm) Lead Length 30 8.3ms Single Half Sine-Wave =TT j j max (JEDEC Method) CURRENT, (A) PEAK FORWARD SURGE 1.2 (A) AVERAGE FORWARD CURRENT, DERATING CURVE 20 10 1 Cycle 0 0 75 50 25 100 125 150 175 0 1 2 AMBIENT TEMPERATURE, ( ° C) 4 FIG.
PAGE 6
IN4148 SILICON EPITAXIAL PLANAR SWITCHING DIODE TECHNICAL SPECIFICATION REVERSE VOLTAGE: 75V FORWARD CURRENT: 150mA FEATURES DO - 35 • Small glass structure ensures high reliability • Fast switching • Low leakage • High temperature soldering guaranteed: 250oC/10S/9.5mm lead length at 5 lbs tension 1.0 (25.4) MIN. .120 (3.0) .200 (5.1) .060 (1.5) .090 (2.3) DIA.
PAGE 7
GENERAL PURPOSE SILICON RECTIFIER 1N5400 THRU VOLTAGE RANGE CURRENT 1N5408 50 to 1000 Volts 3.0 Ampere FEATURES Low cost construction. Low forward voltage drop Low reverse leakage High forward surge current capability. High temperature soldering guaranteed: 260 /10 seconds, 0.375" (9.5mm)lead length at 5 lbs (2.3kg) tension. MECHANICAL DATA Case: transfer molded plastic Epoxy: UL94V - 0 rate flame retardant. Polarity: Color band denotes cathode end.
PAGE 8
RATINGS AND CHARACTERISTIC CURVES IN5400 THRU IN5408 FIG.2-MAXIMUM NON-REPETITIVE PEAK FIG.1-TYPICAL FORWARD CURRENT FORWARD SURGE CURRENT 2.0 Single Phase Half Wave 60Hz 1.0 Resistive or Inductive Load Lead Length 0.375"(9.5mm) 200 8.3ms Single Half Sine-Wave =TT j j max (JEDEC Method) CURRENT, (A) PEAK FORWARD SURGE 3.
PAGE 9
AXIAL SILASTIC GUARD JUNCTION STANDARD RECTIFIER VOLTAGE RANGE CURRENT 6A05 THRU 6A10 50 to 1000 Volts 6.0 Ampere FEATURES • • • • • .052(1.3) DIA .048(1.2) Low coat construction Low forward voltage drop Low reverse leakage High forward surge current capability High temperature soldering guaranteed: 260℃/10 secods/.375”(9.5mm)lead length at 5 lbs(2.3kg) tension 1.0(25.4) MIN. .360(9.1) .340(8.6) MECHANICAL DATA • • • • • • .360(9.1) DIA .340(8.
PAGE 10
AXIAL SILASTIC GUARD JUNCTION STANDARD RECTIFIER VOLTAGE RANGE CURRENT 6A05 THRU 6A10 50 to 1000 Volts 6.0 Ampere RATING AND CHRACTERISTIC CURVES 6A05 Thur 6A10 FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 60 Hz Resistive or Inductive loads Group Plane 1" X 1" Copper Surface Area Recommended P.C. Board Mounting 4.0 3.0 2.0 P.C. Board Standard P.C. Board Mounting 1.0 0 0 25 50 60 100 75 150 125 CURRENT, (A) 300 PEAK FORWARD SURGE 5.