Safety data sheet

Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Item no.: 1386783
Material Safety Data Sheet
8. Exposure Controls/Personal Protection
8.1 Engineering Controls
Handle in accordance with good industrial hygiene and safety practice. Provide appropriate local exhaust for cutting, grinding,
sanding or machining. Wash hands thoroughly after use.
8.2 Personal Protective Equipment (PPE)
8.2.1 Eye/Face Protection
Not applicable.
8.2.2 Skin Protection
Not applicable. Gloves not normally required. Avoid prolonged or repeated skin contact.
8.2.3 Respiratory Protection
Avoid breathing of dust created by cutting, sanding, grinding or machining. If airborne contamination is to be exceeded, a
NIOSH approved respirator in accordance with OSHA regulations should be employed: half-mask dust respirator.
8.2.4 Prevention Swallowing
Not applicable.
8.3 Exposure guidelines
None established.
9. Physical and Chemical Properties
General Physical Form Solid
Autoignition Temperature N/A
Flash Point N/A
Flammable Limits – LEL N/A
Flammable Limits – UEL N/A
Boiling Point N/A
Vapor Density N/A
Vapor Pressure N/A
Specific Gravity N/A
pH N/A
Melting Point N/A
Solubility in Water N/A
Viscosity N/A
Page 3 of 4