Data Sheet

ManualsBrandsConrad Components ManualsEducation & Development KitsTemperature switch Assembly kit 12 V DC -10 - 100 °C

LM741

www.ti.com

SNOSC25C –MAY 1998–REVISED MARCH 2013

LM741 Operational Amplifier

Check for Samples: LM741

FEATURES

DESCRIPTION

The LM741 series are general purpose operational

• Overload Protection on the Input and Output

amplifiers which feature improved performance over

• No Latch-Up When the Common Mode Range

industry standards like the LM709. They are direct,

is Exceeded

plug-in replacements for the 709C, LM201, MC1439

and 748 in most applications.

The amplifiers offer many features which make their

application nearly foolproof: overload protection on

the input and output, no latch-up when the common

mode range is exceeded, as well as freedom from

oscillations.

The LM741C is identical to the LM741/LM741A

except that the LM741C has their performance

ensured over a 0°C to +70°C temperature range,

instead of −55°C to +125°C.

Connection Diagrams

LM741H is available per JM38510/10101

Figure 1. TO-99 Package Figure 2. CDIP or PDIP Package

See Package Number LMC0008C See Package Number NAB0008A, P0008E

Figure 3. CLGA Package

See Package Number NAD0010A

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2All trademarks are the property of their respective owners.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (11 pages)

PAGE 1
LM741 www.ti.com SNOSC25C – MAY 1998 – REVISED MARCH 2013 LM741 Operational Amplifier Check for Samples: LM741 FEATURES DESCRIPTION • • The LM741 series are general purpose operational amplifiers which feature improved performance over industry standards like the LM709. They are direct, plug-in replacements for the 709C, LM201, MC1439 and 748 in most applications.
PAGE 2
LM741 SNOSC25C – MAY 1998 – REVISED MARCH 2013 www.ti.com Typical Application Figure 4. Offset Nulling Circuit These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
PAGE 3
LM741 www.ti.com SNOSC25C – MAY 1998 – REVISED MARCH 2013 Electrical Characteristics(1) (continued) Parameter Test Conditions Input Offset Voltage Adjustment Range TA = 25°C, VS = ±20V Input Offset Current TA = 25°C LM741A Min Typ 3.0 Min Typ Max ±15 30 20 200 70 85 500 TA = 25°C 30 20 TA = 25°C, VS = ±20V 1.0 80 TAMIN ≤ TA ≤ TAMAX, VS = ±20V 0.5 6.0 Units mV 200 300 nA nA/°C 80 0.210 500 80 1.5 0.3 2.0 0.3 500 nA 0.8 μA 2.
PAGE 4
LM741 SNOSC25C – MAY 1998 – REVISED MARCH 2013 www.ti.
PAGE 5
LM741 www.ti.com SNOSC25C – MAY 1998 – REVISED MARCH 2013 REVISION HISTORY Changes from Revision B (March 2013) to Revision C • Page Changed layout of National Data Sheet to TI format ............................................................................................................
PAGE 6
PACKAGE OPTION ADDENDUM www.ti.
PAGE 7
PACKAGE OPTION ADDENDUM www.ti.com 1-Nov-2013 (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device.
PAGE 8
MECHANICAL DATA NAB0008A J08A (Rev M) www.ti.
PAGE 9
PAGE 10
PAGE 11
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.