Data Sheet
Table Of Contents
- 1 Schematic diagrams
- 2 Absolute maximum ratings and operating conditions
- 3 Electrical characteristics
- Table 3. Tamb = +25˚ C, VCC = +5 V to +15 V (unless otherwise specified)
- Figure 3. Minimum pulse width required for triggering
- Figure 4. Supply current versus supply voltage
- Figure 5. Delay time versus temperature
- Figure 6. Low output voltage versus output sink current
- Figure 7. Low output voltage versus output sink current
- Figure 8. Low output voltage versus output sink current
- Figure 9. High output voltage drop versus output
- Figure 10. Delay time versus supply voltage
- Figure 11. Propagation delay versus voltage level of trigger value
- 4 Application information
- 5 Package information
- 6 Ordering information
- 7 Revision history
NE555 - SA555 - SE555 Revision history
Doc ID 2182 Rev 6 19/20
7 Revision history
Table 7. Document revision history
Date Revision Changes
01-Jun-2003 1 Initial release.
2004-2006 2-3 Internal revisions
15-Mar-2007 4
Expanded order code table.
Template update.
06-Nov-2008 5
Added I
OUT
value in Table 1: Absolute maximum ratings and
Table 2: Operating conditions.
Added ESD tolerance, latch-up tolerance, R
thja
and R
thjc
in
Table 1: Absolute maximum ratings.
04-Jan-2012 6
Modified duty cycle equation in Section 4.2: Astable operation.
Updated ECOPACK
®
text in Section 5: Package information.
Added footnote 1 to Table 6: Order codes as shipping method in
tubes is not recommended for new design.