Data Sheet

SPEC NO: DSAA4232 REV NO: V.5 DATE: APR/14/2006 PAGE: 1 OF 3

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI

Package Dimensions

T-1 3/4 (5mm) SOLID STATE LAMP

Description

The Yellow source color devices are made with

Gallium Arsenide Phosphide on Gallium

Phosphide Yellow Light Emitting Diode.

P/N: L-53LYD YELLOW

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. Specifications are subject to change without notice.

Features



LOW POWER CONSUMPTION.



POPULAR T-13/4 DIAMETER PACKAGE.



GENERAL PURPOSE LEADS.



RELIABLE AND RUGGED.



LONG LIFE - SOLID STATE RELIABILITY.



AVAILABLE ON TAPE AND REEL.



LOW CURRENT IF=2mA OPERATING.



RoHS COMPLIANT.

PAGE 1
T-1 3/4 (5mm) SOLID STATE LAMP P/N: L-53LYD YELLOW Description Features LOW POWER CONSUMPTION. The Yellow source color devices are made with POPULAR T-13/4 DIAMETER PACKAGE. Gallium Arsenide Phosphide on Gallium GENERAL PURPOSE LEADS. Phosphide Yellow Light Emitting Diode. RELIABLE AND RUGGED. LONG LIFE - SOLID STATE RELIABILITY. AVAILABLE ON TAPE AND REEL. LOW CURRENT IF=2mA OPERATING. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.
PAGE 2
Selection Guide Part No. Dice L-53LYD Iv (mcd) [2] @ 2mA Lens Type YELLOW (GaAsP/GaP) Viewing Angle [1] Min. Typ. 2θ θ1/2 0.7 2 60° YELLOW DIFFUSED Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Yellow λD [1] Dominant Wavelength ∆λ1/2 Typ. Max.
PAGE 3
Yellow L-53LYD SPEC NO: DSAA4232 REV NO: V.5 APPROVED: J. Lu CHECKED: Allen Liu DATE: APR/14/2006 DRAWN: Y.L.