Data Sheet

ManualsBrandsConrad Components ManualsEducation & Development Kits130344 Dimmer Assembly kit 230 V AC

Table Of Contents

Withdraw information

EMI Suppression Capacitors (MKP)

Series/Type: B81130*

The following products presented in this data sheet are being withdrawn.

For further information please contact your nearest EPCOS sales office, which will also support

you in selecting a suitable substitute. The addresses of our worldwide sales network are

presented at www.epcos.com/sales.

Ordering Code Substitute Product Date of

Withdrawal

Deadline Last

Orders

Last Shipments

B81130* B3292* 2007-08-10 2008-09-30 2008-12-31

Summary of content (6 pages)

PAGE 1
EMI Suppression Capacitors (MKP) Series/Type: B81130* The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product B81130* B3292* Date of Withdrawal 2007-08-10 Deadline Last Orders 2008-09-30 Last Shipments 2008-12-31 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales.
PAGE 2
EMI suppression capacitors (MKP) B81130 X2 / 275 VAC Not for new design Typical applications X2 class for interference suppression "Across the line" applications Dimensional drawing Climatic Max.
PAGE 3
B81130 X2 / 275 VAC Not for new design Overview of available types Lead spacing 10 mm 15 mm 22.5 mm CR (µF) 0.010 0.015 0.022 0.033 0.047 0.056 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3 27.
PAGE 4
B81130 X2 / 275 VAC Not for new design Ordering codes and packing units Lead spacing CR mm 10 15 22.5 27.5 µF 0.010 0.015 0.022 0.033 0.033 0.047 0.022 0.033 0.047 0.056 0.068 0.10 0.10 0.15 0.22 0.15 0.22 0.33 0.47 0.47 0.68 0.47 0.68 1.0 1.0 1.5 1.5 2.2 2.2 Max. dimensions w×h×l mm 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 6.0 × 12.0 × 13.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 6.0 × 11.0 × 18.0 6.0 × 12.0 × 18.0 7.
PAGE 5
B81130 X2 / 275 VAC Not for new design Technical data Max. operating temperature Top,max Dissipation factor tan δ (in 10-3) at 20 °C (upper limit values) +100 °C at 1 kHz 100 kHz CR ≤ 0.1 µF CR > 0.1 µF 1.0 5.0 CR > 0.33 µF 30 000 s 1.0 Insulation resistance Rins or time constant τ = CR Rins at 20 °C, rel. humidity ≤ 65% (minimum as-delivered values) DC test voltage CR ≤ 0.
PAGE 6
B81130 X2 / 275 VAC Not for new design Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/µs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V 2/µs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor.