Data Sheet

Super-regenerative Learning Code
Receiver module
Model no. ZR17-J
1 - 6
7
8
9
10
D6 - D1
GND
VT
VCC
ANT
Data Output H L Level
Ground
Valid Data Output
DC5V ±0.5V
Antenna
Technical Data
Operating Frequency: 433MHz
Operating Voltage: DC5V±0.5V
Static current: 2.7mA
Modulation type: ASK
Sensibility: -108dBm
Operating Temperature: -10 ~ 60°C
Bandwidth: ±75K
Encoding chip: Program chip
(learn with transmitter which is fixed code PT2262/PT2264/SC2262 & learning code eV1527)
PIN
Press the “Learning Key” for one time , the LED is flashing, then press the button of remote, at this time the
LED of receiver is flashing again , this means they program well , now receiver work on Momentary mode !
Press the “Learning Key” for two time , the LED is flashing, then press the button of remote, at this time the
LED of receiver is flashing again , this means they program well , now receiver work on Latch mode !
Press the “Learning Key” for three time , the LED is flashing, then press the button of remote, at this time the
LED of receiver is flashing again , this means they program well , now receiver work on Toggle mode !
Application:
- Can be mount in PCB panel.
- Wireless data transmission module are widely used in
vehicle monitoring, remote control, small wireless network,
industrial data acquisition system, identification,
wireless remote control system,digital image transmission, etc.
Features:
- Durable and stable for long time use
- Frequency stabilization, high sensitivity and low power dissipation
- Widely used in remote control system, etc.
Operation setting
Copyright@2015 Computace Electronic Technology Company Limi ted. ALL Rights Reserved.