Safety data sheet

Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Item no.: 250540
Material Safety Data Sheet
Page 3 of 6
5. First Aid Measures
Eyes:
Flush with water for at least 15 minutes. If irritation occurs and persists, contact a medical doctor.
Skin:
Remove contaminated clothing and thoroughly wash with soap and plenty of water. If irritation persists, contact a medical
doctor.
Inhalation:
Remove to fresh air. If breathing difficulty or discomfort occurs and persists, see a medical doctor. If breathing has stopped,
give artificial respiration and see a medical doctor IMMEDIATELY.
6. Firefighting Measures
Hazardous Combustion Products:
When burned, hazardous products of combustion including fumes of carbon monoxide, carbon dioxide, and fluorine can occur
Extinguishing Media:
Water, carbon dioxide, dry chemical, or foam.
Basic Fire Fighting Procedures:
Wear NIOSH/MSHA approved positive pressure self-contained breathing apparatus and protective clothing to prevent contact
with skin and eyes.
Unusual Fire & Explosion Hazards:
This material does not represent an unusual fire or explosion hazard.
Flash Point: 65°C (CC) (149F)
Autolgnition Temperature: No Data.
Flammability Limits in Air, Lower, % by Volume: 1.4
Flammability Limits in Air, Upper, % by Volume: 11
7. Accidental Release Measures
Procedure for Release and Spill: Sweep up and place in a suitable container, dispose or waste according to all local, state and
Federal Laws and Regulations.
Before cleanup measures begin, review the entire MSDS with particular attention Potential Health Effects; and on
Recommended Personal Protective Equipment.