Safety data sheet

Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Item no.: 650554
Material Safety Data Sheet
Page 3 of 4
10. Stability and Reactivity
Stability: Stable
Conditions to Avoid: Do not heat, disassemble or charge.
Hazardous Decomposition or By-products: N/A
Hazardous polymerization will not occur.
11. Toxicological Information
Acute toxicity: Organic solvent
Further toxicological information: Lithium
12. Ecological Information
Ecotoxic effects: N/A
Further ecological data: N/A
13. Disposal Considerations
We encourage battery recycling. Our Li-FeS2 batteries are recyclable. Li-FeS2 batteries must be handled in accordance with
all applicable state and federal laws and regulations.
DO NOT RECHARGE, disassemble, short, or subject battery cells to temperatures in excess of 212 F. Do not use in
combination with fresh and used lithium batteries neither with other type of battery.
14. Transport Information
In general, all batteries in all forms of transportation (ground, air, or ocean) must be packaged in a safe and responsible
manner. Regulatory concerns from all agencies for safe packaging require that batteries be packaged in a manner that
prevents short circuits and be contained in “strong outer packaging” that prevents spillage of contents. All original packaging
for our lithium batteries are compliant with these regulatory concerns.
Our lithium iron disulfide batteries are exempt from the classification as dangerous goods as they meet the requirements of the
special provisions listed below. (Essentially, they accord with 55th DGR and are properly packaged and labeled. Our Lithium
batteries contain less than 1 gram of lithium and pass the tests defined in UN model regulation section 38.3).
International transport regulations Special Provisions
ADR 188, 230, 310, 636, 656
IMDG 188, 230, 310, 957
UN UN 3090, UN 3091
US DOT 29, A54, A100, A101
IATA, ICAO Packaging Instructions 968 - 970