Instructions

Model no.: TP-228(4A)
HOW TO USE
Bar graph LCDisplay
BATTERY TESTER
NOTES:
1) Be sure the polarity of the battery must be inserted properly.
2) The battery test is approximate only and cannot indicate whether a battery will function in all applications.
3) The battery tester may not response under high Electrostatic Discharge environment. Manual reset by moving the
battery would be necessary.
A. When testing 1.5V battery
(D; C; AA; AAA; N Type)
1) the ARM
and then insert the
Push up
battery with
POSITIVE (+)
terminal on the top.
2) Slide down the ARM
firmly and read the
RESULTS.
1) Push up the ARM
and then insert the
battery with
POSITIVE (+)
terminal on the top.
2) Slide down the ARM
firmly and read the
RESULTS.
GOOD
WEAK
REPLACE
9V 1.5V
9.0
8.1
7.2
6.3
5.4
4.5
3.6
2.7
1.8
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
Battery
Positive
Sliding ARMNegative
+
( )
( )
-
Positive
Negative
GOOD
WEAK
REPLACE
9V 1.5V
9.0
8.1
7.2
6.3
5.4
4.5
3.6
2.7
1.8
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
Battery
B. When testing 1.5V button cell
(LR44 ; LR41 etc.)
+
( )
( )
-
C. When testing 9V battery
(6F22 type)
1) Hold the battery as
shown with POSITIVE
on (+) left side and
NEGATIVE(-) at right.
2) Make contact with the
test pins and read the
RESULTS.
Negative
GOOD
WEAK
REPLACE
9V 1.5V
9.0
8.1
7.2
6.3
5.4
4.5
3.6
2.7
1.8
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
Battery
Positive
+
( )
( )
-
Test Pin
+
( )
( )
-
BATTERY REPLACEMENT
TEST RESULTS INDICATION
s
s
s
BATTERY TYPE
BUTTON CELL
1.5V
AA/ AAA/ C/ D/ N
1.5V
RADIO TYPE
9V
6F22
LOW BATTERY WARNING:
When indicates on LCD,
needs to replace 1pc. (1.5V)
L R44 type battery.
GOOD
WEAK
REPLACE
9V 1.5V
9.0
8.1
7.2
6.3
5.4
4.5
3.6
2.7
1.8
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
Battery
GREEN
"Weak" condition
YELLOW
"Good" condition
"Replace" or
"Recharge" the
battery
RED
Battery Voltage Indication
GOOD
WEAK
REPLACE
9V 1.5V
9.0
8.1
7.2
6.3
5.4
4.5
3.6
2.7
1.8
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
Battery
Tests all types of 1.5v and 9v battery
31 228 V.00