User`s manual

. C007$
PC-AT
. C004$
NOTEBOOK*
USB HID
. C005$
COMPUTER TYPE
TETHERED SCANNER SETTINGS
GROUP-13
SYMPTOMS SOLUTION
Scanner seems to be
performing as usual,
but no data is being
output.
1. Unplug the cable from the host computer.
2. Plug the cable back into the host computer.
3. Set the scanner to the exact computer type
immediately.
CauƟon: Please ensure the correct computer type is set when the
scanner is aƩached to a new host computer. If set to Notebook, the
scanner will operate with no external keyboard.
CauƟon:
1. This scanner is designed to switch easily between interface
opƟons. To switch from one interface to another, the appropriate
cable must be installed. AŌer changing to a new cable, be sure
to reset the interface seƫng as appropriate.
2. Before switching to USB VCP, please make sure you have
installed proper driver on PC. The driver is available either on
enclosed CD or from your local distributor.
. C001$
PS2 KB
. C002$
RS232
INTERFACES SELECTION
SOLUTION
The wand does not
scan/ The scanner
does not scan when
the trigger is
depressed.
SYMPTOMS
1. Unplug the cable from the host computer.
2. Plug the cable back into the host computer.
3. Set the wand to the correct interface. The
cable needs to match the interface.
. C008$
USB HID
USB VCP
. C006$
*.C006$*