User`s manual

ADVANCED AUTO-SENSING SETTINGS

(The following is only supported by autosensing models)

. F034$

MAGNETIC SWITCH OFF

. F035$

1. The Magnetic Switch is automatically activated when Auto-

Sensing Mode is on.

2. To enable Magnetic Switch, the scanner should be paired with

an Autosense Stand to perform Auto-Sensing function.

3. When Magnetic Switch is disabled, the scanner will perform

Auto-Sensing function without Autosense Stand.

MAGNETIC SWITCH

(CCD & LASER SCANNERS)

GREEN LED/ SUPPLEMENT LIGHT

(CCD SCANNER ONLY)

. F032$

. F033$

GREEN LED OFF

1. The green LED is automatically activated when Auto-Sensing

Mode is on.

2. Green LED serves as Supplement Light for a CCD scanner in

order to enhance the sensitivity of scanner in Auto-Sensing

Mode.

GROUP-15

NOTES:

MAGNETIC SWITCH ON

GREEN LED ON