User`s manual

WIRELESS SCANNER SETTINGS
BLUETOOTH PROFILE
. E042$
1. Press the trigger for 1 second to activate the scanner.
2. Scan [DISCONNECT]
3. Scan [BT mode - SPP]; the scanner will emit several beeps.
4. Select “Wireless Scanner” from discovered device list.
(For PC, please click “Enter the device’s pairing code”)
6. Enter “1234” from the host.
7. Open serial communication software with com port
(see Device Manager) properly set up.
8. The scanner will beep twice to verify the connection.
BT mode - SPP
. E043$
BT mode - HID
1. Press the trigger for 1 second to activate the scanner.
2. Scan [DISCONNECT]
3. Scan [BT mode - HID]; the scanner will emit several beeps.
4. Select “Wireless Scanner” from discovered device list.
(For PC, please click “Create a pairing code for me”)
5. The Bluetooth application may prompt you to scan
a pincode.
6. Follow the steps in PINCODE SETUP section the on next page.
7. The scanner will beep twice to verify the connection.
. E031$
Disconnect
GROUP-21
1. Connect the cradle to the host PC.
2. Scan [DISCONNECT]
3. Scan [BT mode - HID
plug & play], and the scanner will emit
several beeps.
4. Scan the Host Address barcode on the cradle’s bottom.
5. The scanner will beep twice and cradle’s blue indicator
LED will stay on to verify a successful connection.
*Note: Only supported by model with charging cradle.
BT mode - HID plug & play
. E041$
(Recommanded)