User`s manual

WIRELESS SCANNER SETTINGS
Default Wireless ID
. B022$
STEP 1
STEP 5
Scan a desired BT mode in BLUETOOTH PROFILE (GROUP 21)
to complete the configuration.
STEP 4
Set Wireless ID
. B023$
GROUP-25
SET BLUETOOTH DEVICE ID
STEP 2
Set Wireless ID
. B023$
Scan up to 16 alphanumeric characters from Full ASCII
Table (GROUP 35-41) as your desired ID name.
STEP 3
*Note:
1. If you have connected the scanner with the host BEFORE
customizing your Bluetooth device name, please remove
the device and create a new connection to make sure
device name is refreshed. For PC, it is recommended to
restart the Bluetooth adaptor in order to refresh device name.
2. At Step 3, the scanner will beep three times as an alert that
more than 16 characters are entered.
3. To reset the Bluetooth device name to default (”Wireless
Scanner”), please simply do Step1 & Step 5, skipping Step 2
to Step 4.
To customize your own Bluetooth device name for the
wireless scanner, please follow below steps: