User`s manual

WIRELESS SCANNER SETTINGS
GROUP-28
Host sends: CR,LF,{,A,L,},CR,LF (8 bytes)
Scanner replys: O,K,CR,LF (4 bytes)
There are two ways to verify connection status by
the host under SPP profile.
SPP REMOTE CONTROL
This configuration barcode will shut down the scanner
immediately but still reserve the pairing record.
SHUT DOWN
DISCONNECTION
Command Response
Host sends: CR,LF,{,M,1,},CR,LF (8 bytes)
Scanner reacts: a short beep
Beeper Response
. E255$
SHUT DOWN
. E031$
DISCONNECT
(CLEAR PAIRING RECORD)
. E046$
DISCONNECT
(KEEP PAIRING RECORD)