User`s manual

Data Output - Tethered Method
To output stored data via USB-HID please do the following:
1. Connect the scanner and the host with mini USB cable.
2. Scan [USB-HID]
3. Scan [ENABLE MEMORY] (Group 30) and scan your desired barcodes.
4. Open Notepad or any app that can accept HID keyboard input.
5. Scan [OUTPUT DATA]
To output stored data via USB-VCP, please do the following:
1. Install VCP driver (available on CD)
2. Connect the scanner and the host with mini USB cable.
3. Scan [USB-VCP]
4. Scan [ENABLE MEMORY] (Group 30) and scan your desired barcodes.
5. Establish communication by Windows HyperTerminal or other
serial communication softwares.
6. To output data:
(1) simply scan [OUTPUT DATA]
(2) send below string to the scanner:
{,O,1,} (Totals 4 bytes w/o commas)
7. To further clear all stored data, please send below string:
{,O,2,} (Totals 4 bytes w/o commas)
To populate the stored data into Excel spreadsheet, please
follow “CSV Converter Instruction” under “Utility” folder on the
enclosed CD.
Data Output - Interface
Data Output - Wireless Method
To output stored data via WIRELESS, please do the following:
1. Scan [WIRELESS]
2. Follow the steps on Group 21 to connect to host via HID or SPP.
3. Scan [ENABLE MEMORY] (Group 30) and scan your desired barcodes.
4. To output data:
(1) in BT HID profile, simply scan [OUTPUT DATA]
(2) in BT SPP profile, simply scan [OUTPUT DATA] or send below
string to the scanner:
CR,LF,{,O,1,},CR,LF (Totals 8 bytes w/o commas)
to further clear all stored data, please send below string:
CR,LF,{,O,2,},CR,LF (Totals 8 bytes w/o commas)
. C006$
*.C006$*
USB-VCP
. C008$
*.c008$*
USB-HID
. C035$
*.c035$*
WIRELESS
WIRELESS SCANNER SETTINGS
GROUP-31
DATA OUTPUT
For memory version only
. R003$
*.R003$*
OUTPUT DATA