User`s manual
WIRELESS SCANNER SETTINGS
GROUP-34
QUANTITY
For memory version only
Once you enable quantity input, the operation procedure under
memory mode will be as follows:
1. Scan [
ENABLE MEMORY
] (Group 30)
2. Set DATA FORMAT (Group 32) as appropriate. For example, your
data format is <Barcode Data>, <Quantity>.
3. Scan a random barcode; it will be stored as <Barcode Data>.
4. Scan [
SET QUANTITY
]
5. Scan the numeric barcodes in page 9 &10 as desired (ranges
from 1 to 99999); it will be stored as <Quantity>.
6. Scan [
SAVE DATA
]
7. Repeat Step 3 -- 6 to complete your task.
8. Output memory data (refer to Data Output section in Group 31)
and the result will be:
<Barcode Data 1>, <Quantity 1>
<Barcode Data 2>, <Quantity 2>
<Barcode Data 3>, <Quantity 3>
...............
..........
. R017$
*.R017$*
ENABLE QUANTITY INPUT
. R015$
*.R015$*
SET QUANTITY
. R016$
*.R016$*
SAVE DATA
. R018$
*.R018$*
DISABLE QUANTITY INPUT
Once quantity input is diabled, the operation procedure under
memory mode will be as follows:
1. Scan [
ENABLE MEMORY
] (Group 30)
2. Set DATA FORMAT (Group 32) as appropriate. For example, your
data format is <Barcode Data>, <Quantity>.
3. Scan a random barcode; it will be stored as <Barcode Data>
4. Repeat Step 3 to complete your task.
5. Output memory data (refer to Data Output section in Group 31)
and the result will be:
<Barcode Data 1>, 00001
<Barcode Data 2>, 00001
<Barcode Data 3>, 00001
...............
..........
*By default, <Quantity> = 00001. To remove <Quantity> from the
data format, simply repeat Step 2 but set <Barcode Data> only.