Operating instructions

15
3. Setting the language (Command “LANGUAGE”)
This command sets the product langauge.
SET LANGUAGE <DE/EN> #1513
Example:
SET LANGUAGE DE #1513
This command is needed to reset to German:
RESET LANGUAGE #1513

There is no TEST command for this command.
4. Setting Time and Date (Command “TIME”)
The product offers time and date settings. This way, the precise time and date at which the text message was generated is stored in the text
message, independently of when the text message was sent or received. Various functions also require the current time and date.
SET TIME <hh mm dd mm yy> #1513
Hour Minute Day Month Year
(0-23) (0-60) (1-31) (1-12) (0-95)
Example:18:22 hours, 24.03.2012
SET TIME 18 22 02 04 12 #1513 time
Example of a text message response:
GX103_GPS 1.08
Time: 18:22
Date: 02.04.12 Mo
GPS: on
Status: off
Protective time: not specified
Alarm every 7 min
GPS: 60 min
Alarm en. delay: 15s
Alarm delay: 0s
To check the current time, use the following command:
TEST TIME #1513

There is no RESET function for this command.