Operation Manual

• Attach the enclosed projection aerial to the innter contact of the connection ANTENNA FM 75Ù. Position the

aerial so as to attain the best reception.



For better reception, this connection can also be connected to your house aeriel or cable connection.

For this purpose, use an unsymmetrical 75 Ohm aerial cable.

• Attach the enclosed frame aerial to the ANTENNA AM LOOP connection Position the AM frame aerial so as to

attain the best reception. The AM frame aerial may be placed on a level surface or mounted on a wall.



Position the aerial as far away as possible from all possible sources of interference (motors, power

cables, radion installations etc.).

Connecting the power supply

The POWER key (1) does not disconnect the device fully from the mains. To disconnect the

device completely, it should be unplugged.

• Plug the tuner into the public power supply (230V~/50Hz).

Operation

(1) POWER button

This button switches the radio on and off.

1x press > Device is turned on.

2x press > Device is placed in standby mode