Operating instructions

10. Operation

After you have installed the wireless sensors and started the display console, the data of the wireless sensor will not

at once appear on the display.

Since each sensor has an individual serial number, it must be registered separately at the display console.

This method has the advantage that only individually registered sensors are detected and no sensors of a third

system nearby; this is also the case when the system is restarted.



Please note:

If no entry field is touched for approx. 5 seconds when making entries in the menu bar, the station

automatically returns to the main menu (any settings you have made are applied). After an entry, you

should therefore wait until the main menu appears again.

This allows you also to leave a menu after each setting step.

Press only lightly on the entry fields, do not apply too much force. Do not press or knock on the display

with objects, nor with your fingernail!

Your fingers should be dry and clean when you touch the display (a special cleaning mode can be

activated to clean the display without triggering functions).

When you remain on a setting field with your finger, the values in the menus can be configured more

quickly, they will run automatically and you do not have to tap the display repeatedly.

a) Registering / deleting external sensor

You can register up to 9 external sensors. Memory position 9 is reserved for the combination sensor; all other sensors

occupy the memory positions 1 to 8.

To unambiguously assign the sensors when using several sensors of the types ASH888, ASH888I and S888IA, we

recommend to remove the batteries of all sensors first.

X Registration

• Touch the "CFG" field in the menu line. You will see:

NEXT SENSOR ENTER NEXT SENSOR ENTER

NEXT SENSOR ENTER

• Touch "NEXT" and you will see:

NEXT SENSOR ENTER NEXT SENSOR ENTER

NEXT SENSOR ENTER

• Touch "ENTER" and you will see:

SENSOR NO 1 ADD DEL SENSOR NO 1 ADD DEL

SENSOR NO 1 ADD DEL