Operating instructions

X 9. "LIVE MODE" menu, starting the weather ticker

The live mode is started by applying an additional touch field which prompts the combination sensor to send its data

in 2-second intervals during a period of 20 seconds. This allows you to track e.g. the current weather conditions e.g.

the wind direction and the wind speed in real-time for a period of 20 seconds.



In LIVE MODE the combination sensor consumes more power because it switches to reception more

frequently. This reduces the battery lifetime.

You can therefore set a time limit for this mode in the LIVE MODE menu. During that time, the additional touch field

REQ will appear in the main menu line which triggers the live weather ticker.

• Select the "LIVE MODE" menu:

NEXT LIVE MODE ENTER NEXT LIVE MODE ENTER

NEXT LIVE MODE ENTER

• Touch "ENTER" and you will see:

BEGIN + 16.00 - BEGIN + 16.00 -

BEGIN + 16.00 -

• Touch "+" or "-" to set the switch-on time for the LIVE MODE.

• Touch "BEGIN" and you will see:

END + 23.45 - END + 23.45 -

END + 23.45 -

• Touch "+" or "-" to set the switch-off time for the LIVE MODE.

• Wait a few seconds and the station will return to normal mode and your settings will be activated.

• The following message appears in the menu line while the data are transmitted to the combination sensor:

WAIT FOR TRANSMISSION WAIT FOR TRANSMISSION

WAIT FOR TRANSMISSION



While this message is displayed, the weather station can not be operated.

• The additional touch field "REQ" is displayed on the menu when the LIVE MODE is activated for requesting the

data:

MIN MAX RESET REQ CFG MIN MAX RESET REQ CFG

MIN MAX RESET REQ CFG