User's Manual

30 kW S-BAND/U ANTENNA GROUP
PREVENTIVE MAINTENANCE
4.8 Rev. C
CARD 5 (Continues)
STEP SEQUENCE OF OPERATIONS
− on the Display switch on the RTM unit;
− by means of the push-buttons plus and minus of the RTM CONT B Board
(Chapter 9, Figure 9.1.22 pos. 11), adjust the trigger until the distance displayed
on the Display and the distance measured are equal;
− on the Display switch off the RTM Unit;
− on RTM CONT B Board, position S1 and S2 (Chapter 9, Figure 9.1.22 pos. 3) on
0 (zero);
− remove the jumper P17.
7.
Reinstall the front cover and tighten the 6 screws as necessary.