Troubleshooting guide

8
Searching fast forward is selected by holding down the button on the
remote control. The search speed will start slow and will increase to
high after some seconds.
fast backward
Searching fast backwards is selected by holding down the button on the remote
control. The search speed will start slow and will increase to high after some seconds.
Repeat CD
To repeat the complete CD, press the button once. “REP cd” will be
displayed on the screen.
Repeat track
To repeat the track playing, press the button twice. “REP tr” will be
displayed for two seconds on the screen.
.
Cancel repeat
To cancel repeat, press the button third.
From left to right the connectors are :
AC Power connection 240V / 230V / 220V / 115V / 100V AC dependent on country.
Digital output Phono/RCA
Balanced signal outputs XLR right/left
Unbalanced outputs Phono/RCA right/left
We recommend to connect signal cables to the CD-player when the CD-player and all the
other units of the audio system is switched off.
The CD-player has two types of analog audio outputs: unbalanced audio signal with RCA
plugs (phono plugs) and true balanced audio signal with XLR plugs (pin 2 is positive
phase, pin 3 is negative phase and pin 1 is chassis earth).
We will recommend using the balanced XLR outputs from the CD-player, as these will
have the absolute highest level of sound quality.