User Manual

6
STEP 3.2: WIRING APPLICATION
Low Voltage Connections (refer to Fig. F):
1. Use a standard Single-Gang Low-Voltage Bracket for low-voltage devices.
2. Insert the Low-Voltage Bracket into the desire position on the CON1001
Entertainment Box. Use the mounting screws on the Low-Voltage Bracket
to attach it to the enclosure.
3. Route the low-voltage cables/wires through the bracket. Be sure to choose
an adequete low-voltage device trhat is suitable for the desired application.
NOTE: For complete wiring instructions consult the installation guide
specific to the individual device.
4. If applicable, install the appropriate size wallplate by attaching it to the
device box and the device.
NOTE: Use the screws most suitable for securing the wallplate. Consult the
wallplate specifications to determine any recommended usage.
5. To install additional low-voltage brackets use the remaining positions on
the CON1001 Entertainment Box and repeat steps 1 through 4. For unused
slots, attach the Quick-Snap cover plate.
Figure F
Low-Voltage
Bracket
Low-Voltage
Wires To
Device