Operation Manual

26
Changing the clock
To subsequently change the time, press the .-clock function
button repeatedly until the .- and  symbols light up again.
Change the time with the rotary selector.
Cleaning the appliance
Clean your appliance before using it for the first time.
1. Remove accessories and any remaining packaging from the
cooking compartment.
2. Clean the accessories and cooking compartment with hot
soapy water (see section: Cleaning and care).
3. Heat with  Top/bottom heat at 240°C for 60 minutes.
4. Afterwards, wipe the cooled cooking compartment with hot,
soapy water.
5. Clean the outside of the appliance with a soft, damp cloth
and soapy water.
Operating the appliance
In this section, you will find out how to use your appliance,
change the basic settings, and when your appliance switches
off automatically.
Switching on the appliance
1. Turn the operating mode selector until the symbol for the
desired operating mode illuminates.
A default temperature appears on the temperature display.
2. Turn the temperature selector to change the default
temperature.
The appliance begins heating.
Notes
ʋ The steam cooking p and Hydro clean ! operating modes
can only be started if neither  nor ¤ are displayed in the
temperature display.
ʋ If no default temperature is displayed, the temperature for
your selected operating mode is a fixed setting. You cannot
change this temperature.
Current temperature
Press the  info button. The current temperature appears for
3seconds.
Note: The current temperature can only be displayed with
operating modes with a default temperature.
Heating indicator
The heating indicator displays the rising temperature in the
cooking compartment.
ʋ Temperature reached (figure A)
ʋ Appliance reheating (figure B)
Switching off the appliance
Turn the operating mode selector to the à position. The
appliance is switched off.
The appliance has a cooling fan. After the appliance is switched
off, the cooling fan may continue to run.
You can see in the temperature display whether there is high or
low residual heat in the cooking compartment.
Operating mode Default temper-
ature in °C
Temperature
range in °C
 Hot air 160 40 - 200
$ Defrost Fixed setting -
 Top/bottom heat 170 50 - 275
 Circotherm intensive 220 50 - 275
s Bread-baking 200 180 - 220
 Bottom heat 200 50 - 225
 All-round grilling 170 50 - 250
 Full-surface grill 220 50 - 275
 Centre-area grill 180 50 - 275
p Steam cooking Fixed setting -
!Hydro clean Fixed setting -
? Light Fixed setting -
Temperature dis-
play
Meaning
 Residual heat high (above 120 °C)
¤ Residual heat low (between
60 °C and 120 °C)
Operating mode Default temper-
ature in °C
Temperature
range in °C
$ %