Operation Manual
27
Changing the basic settings
Your appliance has various basic settings, which are preset at
the factory. You can, however, change these basic settings as
required.
The appliance must be switched off and controls must not be
locked.
1. Press and hold the info button for 3 seconds to go to
the basic settings menu.
In the temperature display, ³¯ appears.
2. Press the info button briefly and repeatedly until the setting
symbol for the current basic setting of a submenu is
displayed in the temperature display (e.g. ´).
3. Using the temperature selector, set the required basic setting
within a submenu (e.g. ´´).
4. Press and hold the info button for 3 seconds.
Your basic setting is saved.
You can change the following basic settings:
Automatic safety cut-out
The automatic safety cut-out is activated if your appliance is
switched on and you have not made any settings for a long
time.
The length of time after which your appliance switches itself off
depends on the settings that you make.
¯¯¯ flashes in the temperature display. Appliance operation is
interrupted.
Turn the operating mode selector to the à position to deactivate
it.
Electronic clock
In this section, you can read about
ʋ how to set the timer
ʋ how to switch off your appliance automatically
ʋ how to switch your appliance on and off automatically
(preset operation)
ʋ how to set the time
ʋ find out how to activate rapid heat up
Clock display
Notes
ʋ Between the times :¯¯ and :É the clock display is
dimmed if you do not make any settings in that period or no
clock function is activated.
ʋ When you set a clock function, the time interval increases
when you set higher values (e.g. cooking time up to³:¯¯¤ to
the minute, using ³:¯¯¤
to the nearest 5 minutes).
ʋ For the 4 minute minder, [ cooking time, \ end of
operation and preselection mode clock functions, a signal
sounds when the settings have elapsed and the 4 or \
symbol flashes. To cancel the audible signal before it ends,
press the .- clock function button.
ʋ Briefly press the .- clock function button to select a clock
function. You then have 3 seconds to set the selected clock
function. After this time, the setting mode is exited
automatically.
Basic settings menu
Submenu Basic setting Setting
symbol
Childproof lock Appliance controls
unlocked
³¯
Appliance controls locked ³³
Appliance controls perma-
nent lock
³
Audible signal Audible signal off ³¯
Audible signal 30 seconds ´³
Audible signal 2 minutes ´
Audible signal 10 minutes ´´
&ORFNIXQFWLRQEXWWRQ 5RWDU\VHOHFWRU
Clock function Use
4 Timer You can use the minute minder as an egg timer or a kitchen timer. The appliance does
not switch on or off automatically
[ Cooking time The appliances switches off automatically after a cooking time setting has elapsed
(e.g. ³:´¯ hours)
\ End of operation The appliance switches off automatically at a set time (e.g. ³:´¯ )
Preset operation The appliance switches on and off automatically. Cooking time and end of operation
have been combined.
Clock Setting the clock
I Rapid heat up Shortens the heat up time