Instructions / Assembly

Hidden Flange Gable Louver - used for new stucco or siding walls
3) Finish with lath and plaster or
siding material.
1) Frame opening 1/4" larger than vent
body size.
2) Insert vent into opening and fasten
to frame with galvanized nails
2
3
Size A x B N.F.V. Rough Opening
12 in. x 12 in. 63 Sq. In. 12.25 in. x 12.25 in.
12 in. x 18 in. 93 Sq. In. 12.25 in. x 18.25 in.
14 in. x 12 in. 65 Sq. In. 14.25 in. x 12.25 in.
14 in. x 18 in. 110 Sq. In. 14.25 in. x 18.25 in.
14 in. x 24 in. 147 Sq. In. 14.25 in. x 24.25 in.
18 in. x 24 in. 190 Sq. In. 18.25 in. x 24.25 in.
24 in. x 24 in. 253 Sq. In. 18.25 in. x 24.25 in.
24 in. x 30 in. 317 Sq. In. 24.25 in. x 24.25 in.
Gable Louver - 1/4 inch galvanized insect screen.
GABLE LOUVERS
INSTALLATION GUIDELINES
These installation guidelines are for use with typical or standard applications. It is always recommended to seek advice from a licensed professional, and to
check with your local building inspector or building permit office for approvals and possible variations that may apply.
CAUTION! Working above grade is inherently dangerous, be sure that proper fall protection measures are in place.
When working with power tools and sheet metal, gloves and eye protection are absolutely required.
CENTER FLANGE
STUCCO FLANGE
1
⁄"
7/8 in. Stucco FlangeCenter Flange