Instructions / Assembly

KWIKMESH™
INSTALLATION GUIDELINES
These basic installation guidelines are for use with typical or standard applications. It is always recommended to seek advice from a licensed
professional, and to check with your local building inspector or building permit office for approvals and possible variations that may apply.
Kwikmesh is a multi-use screening material in conveniently sized rolls. Recommended uses include ventilation for
new construction, vent repair, rodent and insect control, and tree trunk protection. Kwikmesh is made from 1/8 in.
corrosion resistant galvanized expanded metal. Kwikmesh is a versatile addition to any toolbox.
1. Remove the old or damaged vent. Using ordinary
avaition shears cut a piece of Kwikmesh™ that is at least
1 inch larger than the hole you’ll be covering.
Kwikmesh™ cuts easily with standard aviation shears.
Ordinary scissors will not be strong enough.
Cutting Kwikmesh™ exposes many sharp points and the
roll tension may cause it to spring back. Always wear eye
protection and gloves when working with Kwikmesh™
2. Staple along the top with approximately 1 inch
spacing, keeping the Kwikmesh smooth and at.
Continue with the sides and nish with the bottom.