Instructions / Assembly

SM-Rib
2
Important Information
Finishes
40-year warranted SemCoat Plus is a uoroceram
premium coating manufactured by BASF/Morton
International Inc. It contains 70% Kynar 500 or Hylar
5000 PVDF resin over Galvalume ASTM-A792
structural steel grade 50.
35-year warranted SemCoat SP is a siliconized poly-
ester premium coating applied to a galvanized steel
substrate coated with zinc (G90). This nish consists
of a primer coat top and bottom and the primary
color applied to the top of the panel.
Panels are also available in 25-year warranted
Acrylic coated Galvalume ASTM-A792 structural
steel grade 50 and non-warranted hot dipped G-90
Galvanized mill nish. Please note, acrylic coated
Galvalume panels may not weather uniformly after
installation. This is not a defect in the product or a
cause for rejection. If non-uniform weathering is a
concern, Southeastern Metals recommends selection
of a color-coated panel.
Colors
For panel color selection, please refer to the
Southeastern Metals Metal Roong Color Chart.
Job Estimating and Takeos
Southeastern Metals oers this valuable service at
no charge. In order to complete estimation requests,
it is absolutely necessary that Southeastern Metals
be furnished with detailed, accurate information and
drawings regarding the project prior to assistance.
Southeastern Metals can assist customers in deter-
mining the amount and length of material required
for the project, but it is the customer’s responsibil-
ity to review and eld verify the material required
to complete the project. Southeastern Metals will
not be held accountable for incorrect lengths and
quantities. Prior to ordering and installing materials,
all dimensions should be veried by eld
measurements.
Job Site Delivery Available
The job site delivery disclaimer must be completed
to use this service.
Miami-Dade County and Local Code Compliance
Southeastern Metals’ 26 Gauge SM-Rib products are
Miami-Dade County approved and comply with the
most recent testing requirements. Contact our techni-
cal department for a copy of our current Miami-Dade
County NOA compliance report if one is required for
your purposes.
Building codes for metal roong applications vary
by county and project. For information regarding
pertinent building code requirements and ordinances,
contact your local building code organization.
Southeastern Metals acts only as the seller of roof-
ing materials and has no control of the application
of materials or the conditions under which they are
applied. A registered engineer or architect of record
for the project assumes the responsibility of detailing
the applications.
Warranties
Acrylic coated Galvalume panels are warranted not
to perforate due to red rust for a period of 25 years
provided the project installation meets the limitations
detailed in Southeastern Metals’ warranty document.
For full warranty coverage, panels must be installed
more than one mile from an aggressive environment
such as, but not limited to, salt water. Those projects
within a 1/2 mile to one mile proximity of an aggres-
sive environment are covered by a ve-year warranty.
Due to the characteristics of the coating, cosmetics
cannot be controlled and are not covered by the
warranty.
35-year SemCoat SP panels are warranted against
paint peel, check, chip, or crack resulting from a manu-
facturer’s defect for a period of 35 years from the date
of invoice provided the project installation meets the
limitations detailed in Southeastern Metals’ SemCoat
SP warranty document. For full warranty coverage,
panels must be installed more than one mile from an
aggressive environment such as, but not limited to,
salt water. Those projects located within a 1/2 mile to
one mile proximity of an aggressive environment are
covered by ten year warranty. Excessive, non-uniform
chalk and fade are covered for the rst 10 years.
40-year SemCoat Plus panels are warranted against
paint peel, check, chip, or crack resulting from a
manufacturer’s defect for a period of 40 years from
the date of invoice providing the project installation
meets the limitations detailed in Southeastern Metals’
SemCoat Plus warranty document.