Instructions / Assembly

ManualsBrandsConstruction Metals ManualsHeating, Ventilation, and Air Conditioning14 in. x 18 in. Flange Front Bonderized Vulcan Gable Vent

1) Frame opening 1/4" larger than vent body size and drill pilot holes in corners from inside of wall.

2) Mark straight lines between pilot holes and cut rough opening from from exterior wall

3) Apply sealant around inside of ange

4) Insert vent into opening and secure with screws (2 ea. side). For a cleaner nish, fasten screw

through sides between blades.

Note: Flange Front Gable Louvers have 1/4 inch mesh

INSIDE

VULCAN GABLE LOUVERS

INSTALLATION GUIDELINES

These installation guidelines are for use with typical or standard applications. It is always recommended to seek advice from a licensed professional, and to

check with your local building inspector or building permit office for approvals and possible variations that may apply.

CAUTION! Working above grade is inherently dangerous, be sure that proper fall protection measures are in place.

When working with power tools and sheet metal, gloves and eye protection are absolutely required.

FRONT FLANGE

Front Flange

The vent with built-in fire suppression