Installation Manual

4
Connect the keypad cable to the battery box cable
by firmly snapping the connectors together. Then
rotate the deadbolt shaft so that the bump is on
the top side. Next, rotate the deadbolt knob to align
it with the shaft. Install the battery box using two
short silver screws and the back panel screw at the
bottom. Rotate the deadbolt knob by hand to be
sure that it moves freely and that the screws are
not overtightened.
Once your hardware is installed, you may insert
the batteries. The lock will run on 4 batteries in the
lower compartment, but using 8 will provide
much longer battery life.
To complete the installation, log in to the Rently
Smart Home app and follow the in-app instructions.
5
6