User Manual

86 87
This camera is equipped with the 20 custom functions, shown on the table
below. When the camera is first purchased, these are all set to the stan-
dard or “default” functions (standard setting number “0”). (Note that all the
explanations in this manual assume the detail numbers are set to “0”). To
change the custom functions, refer to “Setting custom functions” (page 89).
• When the custom functions are set, the camera’s functions and operating procedures
change. Read this section carefully and be sure to use these features to your best advan-
tage.
<List of Custom Functions>
CUSTOM FUNCTIONS
The functions of this camera can be customized to match your shooting style.
As you work with this camera you will develop your own personal approach.
Standard set-
ting (0)
Power hold time
• Illumination time
also changed.
16 sec.
Changed set-
ting (1)
12 sec.
Changed set-
ting (2)
8 sec.
Changed set-
ting (3)
4 sec.
AE lock by half-
pressing the shut-
ter button
No AE lock AE lock on
Detail number
Function number
1. List of custom functions
Shutter time set-
ting step
1 Tv 1/2 Tv
Exposure compen-
sation step
1/3 EV 1/2 EV
Evaluative meter-
ing display
Exposure com-
pensation
value
Difference to the
center divided
partial metering
Difference to
center-weighted
average metering
ABC Exposure
order
Standard →
over → under
Over → stan-
dard → under
AF target setting
Focus frame
select lever
LIGHT button +
focus frame
select lever
AF supplementary
light
On Off
AF focus beep
On Off
Superimpose
when shutter but-
ton half-pressed
On Off
11-1BC(E)_P086-89 11/15/01 7:29 PM Page 86