Instruction manual

Introduction Getting Ready Taking Pictures Playback Set Up
EN-103
NEXT
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
[J]/[I] Erasing Unwanted Images
«Applicable images: Still images / movies»
There are 3 methods for erasing images recorded on a memory card:
• [ERASE] : Erases just one image.
• [SELECT AND ERASE] : Erases the images you have selected.
• [ERASE ALL] : Erases all the images on the card.
Erasing individual images (ERASE)
Use the procedure below to erase a single image.
1 Turn the camera on and press the mode
buttons UD until "P" lights up on the
mode select LED.
2 Press the MENU button K to display the menu icons.
3 Move the selector lever left l or right r
to select ERASE [J] and press E.
BNote
You can also erase images from the MULTI playback / GROUP playback screen (Æ p.90)
and Quickview screen (Æ p.51
).
A Important
• You cannot erase protected images (Æ p.107).
• Images are displayed as thumbnails in MULTI playback / GROUP playback modes.
When erasing continuous shooting images in MULTI playback mode, take care not to
mistakenly erase images that you want to keep.
• When you erase an image with a postrecorded voice message (Æ p.110
), the sound file
is also erased.
• There are no camera functions to restore an image once it has been erased. When
erasing, take care that you do not erase images that you want to keep.
• When you erase a single image from within a group of continuous images, the group
splits into 2 groups of continuous images.
ERASE