Instruction manual

Introduction Getting Ready Taking Pictures Playback Set Up
EN-129
NEXTBACK
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
5 Move the selector lever left l or right r
to select PictBridge [G] and press E.
The printer connection screen appears.
6 Use the USB cable supplied with the camera to connect the
USB cradle holding the camera to the printer.
A Important
• Do not connect the camera to the printer until the "CONNECT TO PRINTER"
screen shown in step 5 appears on the screen. If you connect to the printer before
this screen appears, the camera will enter PC mode and you will not be able to
print.
• Check the sizes of the USB connectors. Plug the small connector into the USB
cradle and the large connector into the USB port on your printer.
PictBridge
RETURN
CONNECT TO PRINTER