Instruction manual

Introduction Getting Ready Taking Pictures Playback Set Up
EN-135
BACK
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
2 Move the selector lever up u to select
[EXECUTE], then press E.
A message appears asking you to confirm that you want to print the
images.
Refer to "
Specifying the print settings" (Æ p.130) to change print
settings.
3 Move the selector lever up u to select
[EXECUTE], then press E.
Printing begins, and when printing is successfully completed, the print
completion screen appears.
Ending PictBridge
Wait until the print menu screen is displayed, then disconnect the USB
cable.
BNote
Press the MENU button K to display the print
menu screen.
A Important
If an error occurs during printing, an error
message is displayed and printing stops. Refer to
p.190
for information on the message displayed
and the correct response.
BNote
• You can specify the print settings by clicking the
SCENE button I before proceeding with this
step. (See steps 2 to 12 on p.130
for information
on the setting procedure.)
• The number of copies and date imprinting
settings are not shown because the DPOF
settings take precedence.
• During printing, a counter on the LCD monitor
displays the total number of prints and the
number of prints completed so far.
• Press the MENU button K to stop printing in
progress.
EXECUTE
CANCEL
DPOF PRINTING
DPOF 3 PRTS
OFF INDEX SET
EXECUTE
CANCEL
EXECUTE PRINT?
PAPER TYPE
BORDERLESS
DATE
2L
PRINT QTY.
PAPER SIZE
PHOTO
YES
––––
––––