User's Manual

Introduction Getting Ready Taking Pictures Playback Set Up
EN-180
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
[STARTUP MODE] Setting the Mode the Camera Starts In
The camera can be set to always start in still image mode when turned on,
or to start in the same mode as the last time it was turned off.
1 Turn the camera on and press the mode
button D until "G" lights up on the mode
select LED.
2 Move the selector lever up u or down d
to select [STARTUP MODE], then move
the lever right r.
3 Move the selector lever up u or down d
to select the desired mode, then press E.
The selected setting is applied.
[STILL] : The camera switches to still image mode when it is turned on.
(Default)
[LOCK] : When you turn the camera on, the camera uses the mode
used last time the power was turned off.
BNote
This setting is retained when you turn the camera off.
VIDEO OUT
STARTUP MODE
DISPLAY INFO
FILE NO.
MODE RESET
NTSC
STILL
ON
EXECUTE
EXECUTE
SET UP(3/3)
VIDEO OUT
STARTUP MODE
DISPLAY INFO
FILE NO.
MODE RESET
NTSC
STILL
LOCK
EXECUTE
EXECUTE
SET UP(3/3)