User's Manual

20
Figure 3-10 Adjust sensitivity
Press direction button
to select grads value which need modified,
press OK button
to enter the modification of current grads value,
then modify the corresponding value through direction button
,
press OK button
to confirm the modification, press menu button
to cancel the modification. After finishing modification, press menu
button
to exit the modification of current item.
After modifing all item, press menu button
to return to the factory
settings menu.
Note
 When you set the sensitivity, must be careful, adjust the
sensitivity may cause detection errors.
 After adjusting, the sensitivity value of the test item remains
the same size and sequence as before.
Sleep time
The device is set to enter the sleep state when there is no operation.
Under sleep state, the display is turned off, press any button can
restore to the working state at this time.
Note
Under sleep state, the device will automatically power off without
operation for 30 minutes.
System reset
Restore the system to factory settings.
Note
After restoring to factory settings, all user settings(including
sensitivity adjustment) will be restored to the factory state.
About
Display the relevant information of the device.
3.6 Instructions of Bluetooth
3.6.1 Scope of Application
Apply to BC401BT Urine Analyzer.