User's Manual

13
the sign "Recording" would appear on the screen in 30 seconds, then the screen will be automatically
shut down. If click the button at this moment, the sign "Recording" would appear on the screen, and
then the screen will be automatically shut down again; if press the button,the device would return to
the former interface.
e) If turning on the data storage function, the former saved data will be automatically deleted.
f) When recording, the pulse sound indication would be turned off for saving power, after the
screen is shut down automatically.
g) When the storage space is full, it displays “Memory is full” on the screen, and then shut down in
a few seconds. But it will still display “Memory is full” by the next time you turn on the device on
the purpose of warning the user, if press the button again, it will enter the measuring interface.
Figure 8
E Set Wireless state
Move the menu selection bar to"Wireless" item,then press button to turn on/off Wireless.If there is
no data transmission,the Wireless will be closed 5 minutes later..
When the data is being transmitted between device and computer,the user can't change the state
of "Wireless".
F Exit the main menu
Click button to select “EXIT”, then Press button to exit the Main Menu.
6.1.6 PC software operation
By PC software,the user could upload Real-time measure data and storage data.Here the user should
connect the device to the computer by the USB data line or bluetooth adapter.It is recommended to
use the ORICO 4.0 bluetooth adapter. Please refer to "SpO
2
Assistant user manual" for detailed
operation explanation.
The user can't use the USB data line or bluetooth adapter at the same time.Please don't pull out
the USB data line or bluetooth adapter when the data is being transmitted between device and
computer.
6.1.7 Charge
There are two kinds of charge method:
A Connect the device to computer with data line, then the device should be in charge state.
B Connect the device to power supply with power adapter, then the device should be in charge
state.
C When the device is in the state of battery charging, the indication light is on, when the battery
capacity is full, the indication light would be off accordingly.
If the alarm function is on,the device will provide high-priority alarm signal when the battery is