Operation Manual

8
6.3
6.3
6.3
6.3 Mounting
Mounting
Mounting
Mounting the
the
the
the hanging
hanging
hanging
hanging rope
rope
rope
rope
Step 1. Put the end of the rope through the hole.
Step 2. Put another end of the rope through the first one and then tighten it.
Figure 4 M ounting the hanging rope
7
7
7
7 Operating
Operating
Operating
Operating Guide
Guide
Guide
Guide
1 ) Insert the two batteries properly to the direction, and then replace the cover.
2 ) Open the clip as shown in Figure 5.
Figure 5 P ut finger in position
3 ) Let the patient ’ s finger put into the rubber cushions of the clip (make sure the finger is in the
right position), and then clip the finger.
4 ) Press the switch button once on front panel.
5 ) Do not shake the finger and keep the patient at ease during the process. Meanwhile, human body
is not recommended in movement status.
6 ) Get the information directly from screen display.
7 ) The button has three functions .When the device is power off, pressing the button can
open it; When the device is power on, pressing the button shortly can change direction of the screen ;
When the device is power on, pressing the button long can change brightness of the screen .
Press the button shortly when the device is power on, the display mode will change, show as f ollow
figure: