Operation Manual
1
1.
1.
1.
1. Safety
Safety
Safety
Safety
1.1.
1.1.
1.1.
1.1. Instructions
Instructions
Instructions
Instructions for
for
for
for safe
safe
safe
safe operations
operations
operations
operations
Check the main unit and
all
accessories periodically to make sure that there is no visible
damage that may affect patient
’
s safety and monitoring performance about cables and transducers. It
is recommended that the device should be inspected at least once a week. Please stop using the
oximeter
if
there is obvious damage to the device.
Necessary maintenance must be performed by qualified service engineers
ONLY.
The users are
not permitted to service the device by themselves.
The oximeter cannot be used together with devices not specified
in
User
’
s Manual.Only the
accessory that is appointed or recommendatory by manufacture can be used with this device.
This product is calibrated before leaving factory.
1.2.
1.2.
1.2.
1.2. Warning
Warning
Warning
Warning
Explosive hazard — DO NOT use the oximeter
in
environment with inflammable gas such as
some ignitable anesthetic .
DO NOT use the oximeter while the patient is being scanned by MRI or
CT.
DO NOT strand the lanyard
in
order to avoid device drop and damage. The lanyard is made of
non-sensitive material. Please do no t use lanyard
if
the user is allergic to lanyard.Do not enwind neck
with lanyard
in
order to avoid accident.
The disposal of scrap instrument and its accessories and packings(including battery, plastic
bags, foams and paper boxes) should follow the local laws and regulations.Please check the packing
before use to make sure the device and accessories are totally
in
accordance with the packing list, or
else the device may have the possibility of working abnormally.
The person who is allergic to rubber can not use this device.
The disposal of scrap instrument and its accessories and packing (including battery, plastic
bags, foams and paper boxes) should follow the local laws and regulations.
Please check the packing before use to make sure the device and accessories are totally
in
accordance with the packing list, or else the device may have the possibility of working abnormally.
Please choose the accessories which are appointed or recommended by the manufacturer for
avoiding device damag e .
Please choose the battery cha r gers which should be ensured compliance with the requirements
of IEC 60 60 1-1 , or else
it
may damage the device.
P lease don't use the device
in
the course of charging .
The device can only be matched with the compatible probe( optional ).
Please don't measure this device with functional tester for the device's related information.