User Manual
Table Of Contents
- Copyright
- Trademarks
- Product Configuration
- Introduction
- Overview
- Operating Mode Descriptions
- Setup
- Settings
- Preparing the Utility Software
- Utility Software Settings
- Setting Descriptions
- To Register or Set Up a New Access Point
- To Edit Settings for an Existing Access Point
- To Use Data scramble Functions for Better Security
- To Use SNMP Agent Functions
- To Use Spanning Tree
- To Access the APL from a Different Router
- Spanning Tree Algorithms (STA)
- What is an STA?
- STA Parameters
- Sample STA Application
- _
- All settings other than bridge priority settings are identical.
- The root bridge is determined by the priority settings of each ...
- The designated bridge for each LAN segment is determined by roo...
- The designated port for each bridge is determined by the design...
- The root port of each bridge is determined by its path cost to ...
- Ports that are neither designated ports nor root ports are back...
- _
- SNMP Agent Functions
- Troubleshooting
- Appendix
- Product Specifications
- Input/Output Interface
- Glossary
- _
- IEEE (Institute of Electrical Electronics Engineers)
- IEEE 802.11/ IEEE 802.11b
- MIB (Management Information Base)
- SNMP (Simple Network Management Protocol)
- Diversity
- Router
- Bridge
- LAN (Local Area Network)
- RSSI (Receive Signal Strength Indication)
- Spectrum diffusion transmission
- DS (Direct Sequence)
- CSMA/CA (Carrier Sense Multiple Access with Collision Avoidanc...
- Hidden Terminal Problem
- RTS (Request to Send)
- Roaming
- Peer-To-Peer
- AP (Access Point)
- User Unit
- ESS ID (Extended Service Set ID)
- Channel
- _
- Index
FX-DS110-APL
iii
Table of Contents
Table of ContentsTable of Contents
Table of Contents
Copyright............................................................................i
Trademarks ........................................................................i
Product Configuration ..................................................... ii
1. Introduction
1. Introduction1. Introduction
1. Introduction ................................
................................................................
.................................................
.
.................
.
.................
.
.................
.
Features ........................................................................1
Terminology/Abbreviations ..........................................2
Limited One-Year Warranty.........................................2
How to Obtain Service..................................................3
Liability.........................................................................3
Handling Precautions...................................................3
Precautions for Use ......................................................4
Precautions Related to Electromagnetic Interference4
Precautions Related to Service ....................................5
About the Manual.........................................................6
2. Overview
2. Overview2. Overview
2. Overview................................
................................................................
....................................................
.
....................
.
....................
.
....................
.
Component Locations .......................................................7
LED Indicators..................................................................8
DIP Switches.....................................................................9
Multi-channel Operation................................................10
3. Operating Mode Descriptions
3. Operating Mode Descriptions3. Operating Mode Descriptions
3. Operating Mode Descriptions................................
................................................................
.....................................
.
.....
.
.....
.
.....
.
ADHOC (Simple Mode)...................................................13
Infrastructure (Standard Mode) ....................................14
Operating Modes and Communications ........................15
4. Setup
4. Setup4. Setup
4. Setup ................................
................................................................
.......................................................
.
.......................
.
.......................
.
.......................
.
Wall Installation .............................................................17
Using the Mounting Screws (Included).....................17
Using the Magnets (Included)....................................18
Table Top Installation.....................................................20
Cable Installation ...........................................................20
Power Supply Connection...............................................21
Ground Connection.........................................................22