User Manual
Table Of Contents
- Copyright
- Trademarks
- Product Configuration
- Introduction
- Overview
- Operating Mode Descriptions
- Setup
- Settings
- Preparing the Utility Software
- Utility Software Settings
- Setting Descriptions
- To Register or Set Up a New Access Point
- To Edit Settings for an Existing Access Point
- To Use Data scramble Functions for Better Security
- To Use SNMP Agent Functions
- To Use Spanning Tree
- To Access the APL from a Different Router
- Spanning Tree Algorithms (STA)
- What is an STA?
- STA Parameters
- Sample STA Application
- _
- All settings other than bridge priority settings are identical.
- The root bridge is determined by the priority settings of each ...
- The designated bridge for each LAN segment is determined by roo...
- The designated port for each bridge is determined by the design...
- The root port of each bridge is determined by its path cost to ...
- Ports that are neither designated ports nor root ports are back...
- _
- SNMP Agent Functions
- Troubleshooting
- Appendix
- Product Specifications
- Input/Output Interface
- Glossary
- _
- IEEE (Institute of Electrical Electronics Engineers)
- IEEE 802.11/ IEEE 802.11b
- MIB (Management Information Base)
- SNMP (Simple Network Management Protocol)
- Diversity
- Router
- Bridge
- LAN (Local Area Network)
- RSSI (Receive Signal Strength Indication)
- Spectrum diffusion transmission
- DS (Direct Sequence)
- CSMA/CA (Carrier Sense Multiple Access with Collision Avoidanc...
- Hidden Terminal Problem
- RTS (Request to Send)
- Roaming
- Peer-To-Peer
- AP (Access Point)
- User Unit
- ESS ID (Extended Service Set ID)
- Channel
- _
- Index
Introduction
FX-DS110-APL
1
1. Introduction
Thank you for purchasing the FX-DS110-APL access point.
This product is a wireless LAN access point using the 2.4GHz
spectrum diffusion system, and is compatible with IEEE Standard
802.11b for wireless LAN.
The FX-DS110-APL is designed for use as an access point as well
as a station (Ethernet
⇔
wireless converter). It is independent of
operating systems or protocols, so that it can be connected by UTP
cable to any Ethernet-compatible desktop computer, workstation,
point-of-sale terminal, printer, etc. for immediate wireless LAN use.
This product can also enable wireless communications from any PC
previously unsuitable for wireless communications due to lack of a
PC card slot or expansion bus slot.
Of course the FX-DS110-APL also operates as an access point,
allowing the user to configure a small wireless LAN system using
the product by itself.
This document explains how to use the FX-DS110-APL. Be sure to
read it carefully so that you can use the product correctly.
Features
･ Ultra-compact antenna (micro access point)
Space-saving design allows installation anywhere (wall, magnet,
desktop)
･ Operates as a LAN station
･ Optional power supply from LAN cable
Uses compact, lightweight AC adapter.
･ Full range of functions (roaming, 13-channel support)
･ Automatic transmission speed (wireless) switching
Automatically switches transmission speeds from 11Mbps to
5.5Mbps, 2Mbps, 1Mbps according to conditions.
･ Built-in SNMP agent
Uses MNMP compatible software for easy network management.
･ Can be used with higher level model FX-DS110-APE.