Product Manual 232-ATSC HDTV Tuner March 10, 2010 S12 Control Version 1.9 HD Processor Version 1.12 17630 Davenport Road, Suite 113 • Dallas, TX 75252 Phone: 972-931-2728 • Toll-Free: 888-972-2728 • Fax: 972-931-2765 E-Mail: Sales@crwww.com • Website: www.crwww.
Table of Contents Overview ................................................................................................................................................................. 3 Specifications .......................................................................................................................................................... 4 Physical ............................................................................................................................................
The 232-ATSC HDTV Tuner is an integrator-friendly universal HDTV tuner, controllable via two-way RS-232 and discrete IR commands. Able to fit two-across in a 2RU rack space, the compact tuner outputs HDMI, RGB/Component, and composite video simultaneously. NTSC broadcasts are upscaled for HD display. Digital audio is available from HDMI, coax, and optical connections, as well as variable-level stereo audio.
Physical Size (HWD): 8.5” [216mm] wide x 2.43” [62mm] height (2RU) x 8.0” [203mm] deep Weight: 2.
Tuning Frequency Range: ATSC and Clear QAM (cable) television 55.25 to 801.
DIGITAL TUNING OF CABLE Channels Symptom: Channel ID is in XX-XX form, not cable box Guide form Cable boxes translate the actual channel #s into a virtual Channel Guide, using channels 2 – 900, or more. The actual (physical) channels have IDs in XXX-XX form, just like off-air channels. Noncable HDTV tuners like the ATSC or LCD TVs don‟t provide Guide features, so the channels will be displayed in their native, physical major-minor channel form.
HDMI Symptom: No Video or Signal Most monitors accept HDMI in the RGB and Component color space, but there are exceptions. Try switching from RGB to Component (Front panel mode 48). Switch between 720p and 1080i, or down to 480P or 480i for old DVI sets. (Front panel mode 49) If you‟re connecting via a Cat5 interface, HDMI receiver, or switcher, some delay the HDCP signal slightly out of range. Call CR Support on how to extend the delay on HDMI.
To Enter a Front Panel Programming Mode: 1. Press and hold the Power button, then press the Volume Up button. 2. Release all buttons, the 232-ATSC will now be in the front-panel programming mode. The Air LED will flash, indicating programming mode. 3. The first two digits show the mode, the second show the option. 4. Changes are saved in non-volatile memory as they are entered. 5. The Volume up/down buttons scroll through programming modes, forward and reverse. 6.
The HD2-RC IR Remote included with the 232-ATSC can be used to setup the tuner and for daily operation. All of the functions on the remote have equivalent commands in RS-232, Ethernet, and Wired IR formats. In addition, the 232-ATSC front panel buttons can perform Power, Channel, and Volume control. Power Turns tuner on and off. Discrete on and off IR commands are available as well. Volume Control Use the Vol+, Vol- and Mute buttons.
Main Menu Selects sub-menus. Arrow keys highlight option Select (or Enter) chooses option Menu steps back or exits menus Exit exits all menus Some options are only available if you are currently tuned to an analog or digital channel Channel Menus Sub-Menu for Channels offers options for: Channel Auto-Scan Favorite Channel Selection Add/Delete Channels Fine Tune (If tuned to an analog channel) Signal Strength Meter Auto-Scan Starts scan of analog and digital channels.
Favorite Channels Menu is also displayed from the List command, selects channels advanced by the FAV favorite channel command. Use the Up, Down arrows to move through the list, press Select to add a channel to Favorites. Channel Add/Delete This menu can add or delete a channel accessed from Channel Up and Down. You can tune to a channel you want to delete, then press Menu/Channel/Add-Delete. Press Select to delete the channel.
Caption Menus This menu accesses captioning features: On/Off – turn captions on/off – other options are not available if captions are off.
US Rating Use arrows and Select functions to select level of Movie and TV rating allowed. Canada Rating Use arrows and Select functions to select level of Movie and TV rating allowed. Setup Menus This series of menus select the options for tuner operation: Screen Format – 16:9 or 4:3 NOTE: Set when tuned to a digital channel, again when tuned to an analog channel – these are two different settings! You can use RATIO on the remote – does the same setting.
Screen Format Selects between 4:3 and 16:9 aspect ratios. The Ratio command can also adjust the settings.
Pop-Up Menus Info Activated from Info command. Channel – Analog or digital, Mode, Name Time – current time and date Program – Times and name (if digital) Details – Resolution, Audio Mode, Captions, Rating Guide Shows the day‟s programming guide for current station. Use Up or Down arrows to move through Guide.
Overview The 232-ATSC full duplex RS-232 enables a system programmer to control all TV Tuner functions as well as monitor TV Tuner status. All commands are sent as ASCII strings. No delays between characters or commands are required, as data is interrupt driven and buffered. The 3 status groups are: Channel/Source Select, Audio Levels/Mode and Front Panel.
Control Commands Code Function S4= Front Panel Set front panel lockout mode Q5= Set IR Receive mode KK=105 KK=106 KK=107 KK=108 KK=109 KK=110 KK=111 KK=95 P1 P0 PT XX XM XT Menu Arrow Right Arrow Left Arrow Up Arrow Down Enter Exit List Power On Power Off Power Off/On Power On Power Off Power Off/On Tuning Select tuned channel TC= TU TD TP T^ Tune channel up Example: ‘>3TU‟ Tune channel down Previous channel Start Channel Scan S0= Tuning Format D0= Set Channel Scan Mode XD= Channel delete X
Code Function KK=149 KK=151 D4= Display RGB Out YPbPr Out Overscan (0-9)% KK=82 Ratio KK=81 KK=100 KK=62 KK=115 Q0= Signal Info Guide CC – Closed captions Caption Mode Off (0-2) Q1= Example: „>Q0=0‟ or „>Q00‟ Captioning Type (1-8) Q7= VU VD VH VL VX VM VV VT KK=85 SQ SS ST SV Operation Digital Caption Service Audio Ramp volume up Ramp volume down Sets volume level 0-100 Sets volume level 0-63 Volume Mute off Volume Mute on Example: ‘>VM‟ Stop volume ramp Toggle Volume Mute Audio Mode Status Requ
HD2-RC Remote Emulation You can also emulate IR commands sent from the CR HD2-RC Wireless Remote. If you are using the numeric keys to select a channel, the user or program will need to follow the numeric command with an Enter. .
Response Strings Typical: [Attention] [Unit#] [data ...data] [cr] [lf] 232-ATSC status response strings contain ASCII characters similar to those used for the same functions in command strings. An ASCII 'carriage return' and „line feed' follow each response string. Functions shown as N/A are not applicable or available in the 232-ATSC; characters will appear in status strings as lower-case x.
Single Tuner Control Wiring – Single Unit 5 GND 2 RXD 3 TXD RS-232 Control Port GND TXD RXD Channel Up Channel Down 5 3 2 4 9 9-pin D-sub female RS-232 wiring for control or programming should only use pins 2, 3, 5. Cables with all pins wired can lock out front-panel programming and data communication (Pins 4 and 9 are inputs). Multiple Tuners Up to nine tuners can be daisy-chained from one RS-232 control port.
Two options are available for rack-mounting tuners. RK1-HD Insert 232-ATSC into RK1-HD frame. Use screws included with kit to attach tuner to the side flanges.
Read before operating equipment. 1. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 2. Power Sources - Use supplied or equivalent UL/CSA approved low voltage DC plug-in transformer. 3. Outdoor Antenna Grounding - If you connect an outside antenna or cable system to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
Contemporary Research Corporation (CR) warrants this product to be free from defects in material and workmanship under normal use for a period of two years from the date of purchase from CR. Should such a defect occur CR will repair or replace, at their option, the defective product at no cost for parts or labor. This warranty extends to product purchased directly from CR or an Authorized CR Dealer. Consumers should inquire from selling dealer as to the nature and extent of the dealer's warranty, if any.